Adhesion promotor

INTRODUCTION:

Adhesion promotor

Features:

Tape Primer 94 can ONLY be used to promote adhesion of tapes to surfaces such as polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

Tips for using:
- Surface Preparation: The bonding surface must be relatively clean and dry. Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture.
- Make sure the primed surface remains free from contaminants before you apply the tape.

- THIS IS NOT A GLUE AND CANNOT BE USED SOLELY AS A GLUE. THE ADHESION PROMOTER IS FOR BETTER ADHESION OF YOUR TAPE. YOU NEED TO APPLY IT ON A TAPE OR ANYTHING ADHESIVE.


Application:
- Shake primer 94 well before using.
- Leave the primer for a few minutes before applying tape. This is usually accomplished in 5 minutes at room temperature.
- primer 94 may be applied with brush or swab. It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment.
Clean-up:
3M primer 94 can be removed with isopropyl alcohol. Vigorous scrubbing may be required.
- Avoid any contacts with eyes and skin.
- This product is unsuitable for kids.