red white yellow reflective tape

INTRODUCTION:

Red white yellow reflective tape 

Red white yellow reflective tape ,reflective effect in daytime,night. high adhesive, high visibility, warterproof,heat resistant.

Color: Red & white, red & yellow...ect [ OEM ]

Size: 50mm*45.7m (50mm*50y)

Installation

The Vehicle have the Protective device,the reflective tape can be stick on the Protective device .If the Vehicle can not stick the reflective tape,should stick the reflective tape on the scale board and install on the car body .

The Place where to stick the reflective tape should clean and remove the greasy,peel off the release paper and stick on the truck and pressed firmly.

1.First ,should spray a little water on the surface then after stick the reflective tape can also remove ,it can made sure the location is correct .

2.Slowly peel off the release paper and push out the bubble when you stick the reflective.

3.If there is very cold and can not sweep the edge ,you can use the heat gun heated and after melting the glue it can be remove

4.To stick the reflective tape on the point need to stick ,made sure the place need stick and then use the scraper or credit card to scrape out the water and bubble or you can used heat gun to made it dry .
5.After stick the reflective tape should keep the car away from water